Metal flat roof replacement and re-pointing work Grove Oxfordshire

Two garage flat roofs with the old profile sheets being replaced with a new metal roof box section system. When the existing sheets were carefully removed and disposed of, some of the brick work structure around the timber joists were loose

The brickwork was rebuilt and the weatherproofing of the main brick walls was required by raking back joints and re-pointing. New edge trims were added so the garage underwent a complete overhaul that will keep it weatherproof for many years to come.

Chimney work completed at Grove Street Wantage Oxfordshire

This chimney needed re-pointing and the cement fillet around the base of the chimney to be removed and new lead put in place. The cement fillet  moves and cracks over time causing water ingress.

Location: Grove St, Wantage

Job Description: Part of a chimney repair/re-point job. Cement fillet had to be removed and lead put in it’s place. About 4 days work to complete chimney.

Images of the completed work on the refurbishment and repair of this aged chimney
Previous work listed here:


Testimonials new category of what my clients say about us.

This is a new section I have started on my blog / showcase and in my opinion there is nothing better than to receive a written testimonial to my workmanship and the professional way I satisfy my clients requirements. I will publish all testimonials that I receive with permission of my clients.

Click the thumb to enlarge and read what they say, Esc or click away to close image.

Flat roof using Marley SBS Torch On felt system to small extension

This outbuilding located in Portsmouth was extended to make room for a shower and toilet. I was required to put a three layer built up flat roof system on here using traditional and modern methods and the proven Marley SBS torch on product. The roof required boarding with marine grade materials and the necessary battens and weathering profiles, all safety requirements were employed when the final layers were applied and heat used to adhere the coverings to create it’s weatherproof properties . Some detail was also needed to make water tight on the neighbours property and making good where the roof was extended.

Here are the images taken to show the quality of my workmanship from boarding out to the finished flat roof. Click the thumb to enlarge and ESC or click away to close.